RobtoL & RobLion

The Latest Products in RobtoL & RobLion

item ID: NEWS

We have a strong research team and we renew the latest products technical specs for your choice easily. Usually, we’ll renew the info every 30 days. All cutting saw is automatic for 4" blade (2.2Kw, 6000RPM) and 14" blade (11Kw, 1750RPM).

1, Small Diamond Cutting Blade (4"~14") for general and stone


STDJ	STST	STDK	STDL	STDM


STAT	STAV	GEAG	STDH	STDR


STAL	STSG	STAP	NSDB	STAB


GEHD	GEST	STBY	STDS

Normal cutting speed( for dia.105mm segmented, 14~15mm thickness red color granite slab):

	grade 00	grade 01	grade 02	grade 03	grade 04	grade 05
speed: (m/min)	0.8-1.0	1.0-1.5	1.5-2.0	2.0-2.3	2.3-2.8	>2.8

Bond choice as per the table below( for dia.105mm):

type	grade 00	grade 01	grade 02	grade 03	grade 04	grade 05
Fast cutting			XGA-02-002AD (XGS3) (1.6-1.7m/min) JWGA-02-002AD (YGS3) (1.6m/min)			XGA-05-002AD (XGS5) (2.8-3.0m/min) XGA-05-002AD (XGS6) (2.8-3.0m/min)
Normal	1, HGA-00-002A(HGS6) (0.8-0.9m/min) 2, JWGA-00-002A (YGS4) (0.9-1.0m/min) 3, HGA-00-002A (HGS8) (1.0m/min)	JWGA-01-002A (YGS1) (1.1-1.2m/min)	HGA-02-002A (HGS3) (1.5-1.6m/min) XGA-02-002A (XGS2) (1.4.-1.5m/min)	RGA-03-002A (RGS) (2.0~2.1m/min)	XGA-04-002A (XGS4) (2.5-2.6M/MIN) HGA-04-002A (HGS5) (2.2~2.3m/min)
Long life			XGA-02-002AB (XGS1) (1.4-1.5m/min)	1, XGA-03-002AB (XGS7) 2, XGA-03-002AB (XGS8)

* Cutting performance may be different against actual application, all information above only from the cutting in laboratory in RobtoL & RobLion.

2. Diamond Tool for Ceramic/Tile

2.1 Diamond Cutting Blades for Tile/Ceramic (4"~9")


CTTZ	CTBN	CTBC	CTCH	CTAA

Bond choice ( for dia.105mm, cutting deepth: 9mm)
1, XTA-02-002A (XTS5), 3m/min, wet cutting
2, HTA-03-002A (HTS1), 3m/min, wet cutting
3, XTA-02-002A (XTS4), 3.3~3.5m/min, wet cutting
4, XTA-04-002A (XTS1), 4m/min, wet cutting
5, XTA-03-002AF (XTS2), 3m/min (super smooth cutting), wet cutting
6, XTA-03-002A(XTS6), 2.7m/min, dry cutting
7, XTA-07-002A (XTS8), 4m/min, dry cutting

* Cutting performance may be different against actual application, all information above only from the cutting in laboratory in RobtoL & RobLion.

2.2 Sintered Diamond Blade for Ceramic/Tile for Masonry/Tile Saw (10"/14")


CTMC		CTCE

All these blade is based on bronzed bond, so it may be used for cutting ceramic (porcelain tile smoothly and precisely. Usually there are four grit size:80/100,140/170,170/200,200/230 and when you purchase these blade ,you shall advise us the bond grit size, so you may achieve the perfect cutting speed and without chipping cutting edge.

Technical Specs:
Normal size: Dia.250mm, 300mm, 350mm

Bond :
XTA-01-001B (XTS9) at cutting speed at 1.50m/min and 2.0m/min, more detail may be seen in web CTCE and CTMC.

* Cutting performance may be different against actual application, all information above only from the cutting in laboratory in RobtoL & RobLion.

2.3 Welded Diamond Ceramic/Tile Blade (10"~18")


CTAD

Technical Specs:
Normal size: Dia.250mm, 300mm, 350mm
Normal grit size: 80/100, 140/170, 170/200, 200/230#
Life: 3,000~4,000m
Cutting speed: 2.0~2.75m/min
(Ceramic/tile thickness: 5~15mm)
Segment thickness: 1.20~2.20mm
Steel core thickness: 1.00~1.80mm
Segment height: 8~16mm
Bond:
XTW-01-001B (XTH2)

2.4 Diamond Core Bits for Ceramic/Tile


MABK

bond :
XTW-00-002A(XTH1), drilling speed 4.0cm/min (for one hole in 9mm thick ceramic spent 15.94 seconds)

2.5 Diamond Tool for Ceramic


CTLL

We may supply the full range of ceramic diamond tool and you may find it in web:
CTLL

3. Small Diamond Blade for Masonry/Concrete (4"~14")

3.1. Diamond Blade for Cutting Masonry/Concrete Wall for Wire Slot (Block, Brick) (4"~9")


COSQ

Bond choice ( for dia.105mm, deepth: 18mm, ):
DYCA-03-002A (DQS1), cutting speed: 4m/min
DYCA-04-002A (DQS2), cutting speed: 4m/min
RCA-03-002A (RQS1), cutting speed: 4m/min
* Cutting performance may be different against actual application, all information above only from the cutting in laboratory in RobtoL & RobLion.

3.2. Small Diamond Blade for Cutting Reinforcing Concrete (4"~9")


COSR

Bond choice :
XCA-03-002A (XCS1)
HCA-05-002A(HCS1)
XCA-02-002A(XCS2)

update: Jul. 23, 2009

3.3. Laser Welded Diamond Blade for Block /Brick Cutting(4”-9”)


COPL

Cutting speed: 4m/min, bond: XCW-04-001A(XCH6)

4. Diamond Tool for Stone

4.1. Small Diamond Blade for Cutting Marble(4"~9")


STAX	STCM

Technical feature:
1, Cutting speed (wet): 4m/min
2, Cutting material: yellow marble (20mm thickness)
3, Bond:
FMA-03-002A (FMS1)
XMA-02-002A (XTS4)
4, Cutting edge: without chipping and broken pieces for 60~100cm cutting legth with only 8mm width stripe.

* Cutting performance may be different against actual application, all information above only from the cutting in laboratory in RobtoL & RobLion.

4.2. Diamond Cutting Blade for Granite (12"-24”)


STGR	STGI

Technical specs:
1, Cutting material: medium and hard granite (red color).
2, Cutting depth: 30mm
3, Surface Tolerance: <±0.10mm
4, Diamond blade size: dia.350x3.2x10mm(25T, "U" shape narrow slot)
5, Bond choice as per the table below:

type grade 1 grade 2 grade 3 grade 4

Fast cutting QGW-01-001BD(QGH4)
(4.4 m/min,397m)
JGW-01-001BD(JGH1)
(4.25m/min,470m) XGW-02-001BD (XGH4)
( 3.50~4.00m/min, 800~1000m)
QGW-03-001BD(QGH3)
(4.8m/min,541m)
QGW-03-001BD(QGH2)
(4.3m/min,653m)

Normal XGW-01-001B
(XGH2)
(3.8 m/min,470m)
XGW-01-001B
(XGH3), specially for very hard black granite in India. 3m/min
XGW-02-001B(XGH1)
(2.5m/min,1030m)

HGW-03-001B (HGH3)
4m/min, 904m HGW-04-001B(HGH4)
(4m/min,904m)

Long life HGW-01-001BB(HGH2)
(3. 6m/min,516m)
HGW-03-001BB (QGH1)
2.5m/min,1736m HGW-04-001BB(HGH1)
(2.5m/min,1736m)

* Cutting performance may be different against actual application, all information above only from the cutting in laboratory in RobtoL & RobLion.

4.3. Diamond Blade for Cutting Marble and Agate (Welded Type, 12”-24”)


STMA	STMB

Technical specs:
1, Cutting Material: Marble (white and yellow)
2, Cutting depth: 15~25mm
3, Cutting speed: 5m/min (Super fast)
4, Life: 8,000~10,000m (or 1800 sqm)
5, Surface Tolerance: <±0.10mm
6, Diamond blade diameter: dia.350x3.2x10mm(25T, "U" shape narrow slot)
7, Cutting width: 5~6mm without chipping pieces (super smooth).
8, Bond Choice:

1, chocolate color marble(the most soft marble) and yellow color trarertine
XMW-01-001BC (XMH3)

2, yellow color marble (medium-soft marble),also may be used for limestone
(STLM: http://www.robtol.com/pline/ST/STLM.htm )
XMW-01-001BY (XMH1)

3, BLACK COLOR and white color marble (hard marble)
XMW-01-001BW (XMH2)

4, the extremely hard marble (with iron ore)
XMW-04-001BI (XMH4)

5, agate cutting blade
XNW-02-001BM (XNH5)(dia.1200~2200mm)
a, 24*7.2/8.0*12(dia.1400mm)
b, 24*8.4/9.0*12(dia.1600mm)
c, 24*9.5/10.5*12(dia.2000mm)
d, 24*10/11*12(dia.2200mm)

6, agate cutting blade
XNW-05-001BM (XNH6)

* Cutting performance may be different against actual application, all information above only from the cutting in laboratory in RobtoL & RobLion.

4.4. Diamond Cutting Blade for Black Flintstone


STLA

Technical specs:
1, Cutting material: black flint stone.
2, Cutting depth: 30mm
3, Surface Tolerance: <±0.10mm
4, Diamond blade size: dia.350x3.2x10mm(25T, "U" shape narrow slot)
5, Bond System:
a, HLA-04-001B (HFH1)
b, XLA-04-001B (XFH1)
* Cutting performance may be different against actual application, all information above only from the cutting in laboratory in RobtoL & RobLion.

update: Jun.02, 2009

4.5. Diamond Blade for Sandstone Cutting(12”-24”)


STSA

Feature:
Bond detail
Speedy type: XSW-01-001B(XSH2)
Long-life type: XSW-00-001B(XSH3)

* Cutting performance may be different against actual application, all information above only from the cutting in laboratory in RobtoL & RobLion.

4.6. Diamond Blade Segments for Sandstone Cutting (for Blade Dia800-Dia2200)

For example, 14”(40*3*10)
XSH1(XSW-01-001C)
HSH1(HSW-04-001C)

4.7. Nanomaterial Diamond Flexible Polishing Pads


STFP	STFQ

We are one of the first manufacturer to produce flexible polishing pads by nano materical technology.and we also sent the pads to Husqvarna (Belgium) for test and the result has been approved by Husqvarna. The nanomaterial technoloty let the pads with high polishing speed, long polishing life and without color-stay on the stone surface.
Also we have dry flexible polishing pads (STFQ).

4.8. Diamond Saw Wire for Stone and Concrete


WIRE

We have full range diamond wire saw for quarrying ,block cutting ,special shape cutting 9stone and concrete), and you may see the full detail via web:
WIRE

We have tested our diamond wire saw in Italy and Canada. And the result is excellent, and we may tell you more detail for the wire saw in Italy and Canada if you want.

4.9. diamond segments for stone


SGMT

We have listed all technical specs in our website SGMT
So pls kindly check it carefully, and pls advise us your requirement as more as possible so it may help us to supply you much more exactly.

4.10. Metal Bond Diamond Fickert with Aluminium Body for Granite


STCL

Technical Specs:
Normal grit size: 36#~320#
Diamond layer thickness: 10mm/15mm
Total thickness: 40~45mm (steel base + aluminium base + diamond layer)
Length: 140mm/170mm

Life per set (6pcs/set), 140mm:
1, professional bond
Rough grit size (36#), 5000 sqm
Fine grit size (400#), 20,000 sqm
2, high performance bond
Rough grit size (36#), 8000 sqm
Fine grit size (400#), 35,000 sqm

update: Jun. 16, 2009

4.11. Diamond Core Drill Bits for Granite


STCW	STCG

Bond:
HGW-03-002A (HGH9), 4cm/min

4.12. Diamond Segments for Gang Saw


STDA

Bond:
XMW-00-005 (XMH6)
20X4.6/5.4X7mm

5. Diamond Tool for Concrete/Asphalt

5.1. Diamond Blade for Cutting Concrete/Asphalt (12"~48")


COGC	COGD	COHR	COGT

Technical specs and bond choice (Dia.350mmX3mmX10mm, cutting depth 50mm)

type grade 00 grade 01 grade 02 grade 03 grade 04 grade 05

Fast cutting JCW-01-001BD
(JCH1)
(2.5m/min,625m) XCW-05-001BD
(XCH5)
(2.5m/min,1351m)

Normal cutting HCW-00-001B
(HCH3)
(1.63~1.75m/min, 571~649m) JCW-01-001B
(JCH2)
(2 m/min,769m)

Long life cutting XCW-00-001BB (XCH3)
(1.75~1.80m/min,746m)
segment size 40*4*8
1.35m/min,1000m
HCW-02-001BB
( HCH1)
(1.5m/min, 1030m) 1, XCW-03-001BB(XCH2)
(1.37~1.75m/min,1219~1754m)

2, XCW-03-001BB(XCH4)
(1.75m/min,1250m)

* Cutting performance may be different against actual application, all information above only from the cutting in laboratory in RobtoL & RobLion.

All the technical specs in the table be the best at this moment, and it may be renewed by better technical specs if our research team got new info.
Import remind!!!

Cause the concrete/asphalt detail is different each other in different countries, so the cutting result in the table is just for referance! We suggest you had better use the info in the talbe only 30% of the actual cutting performance(of course, the cutting speed is not necessary reduced , in other words, the cutting speed is of not so big difference between the info from the table and your actual cutting)
All our test result is from our laboratory in Robtol &Roblion and use the highest quality concrete in shanghai area around 4000-5000 psi concrete strength, cutting depth all be 50mm).

5.2. Diamond Drilling Core Bits (1"~14")


CBWA

Technical specs:

Specs

Test Result

Segments from RobtoL

Segments from U.K.

Life (meter)
for Reinforcing Concrete

18

18

Drilling Materials

Reinforcing Concrete
(steel bar dia.6~8mm)

Reinforcing Concrete
(steel bar dia.6~8mm)

Speed (cm/min)

5.39

4.47

And the core bits segment shall be of sandwich structure if the diameter is bigger than dia.200mm for keeping drilling speed consistant.

5.3. Wall saw blade (24"~72")


COAD	COAF

Bond choice:
1, QQH1 or XQH1 for high power machinery
2, QQH2 or XQH2 for low or medium power machinery

6. Diamond Tool for Glass

6.1 Sintered Diamond Cutting Blade for Glass Cutting (4"~9")


GLAA	GLSA	GLSC	GLTA

Bond choice:

we produce small diamond blade (4"-9") for glass cutting, we may achieve smooth cutting edge without broken pieces and with only 5-6mm width glass stripe (glass thickness be 11mm), and also we have tested the bond XBS1 (XQA-04-003) thoroughly in a glass factory in Guangdong and the result is perfect . we have three bond system:

1,HQA-03-003(HBS1)
(4",cutting speed 0.6-0.7m/min)
2,ZQA-04-003(ZBS1)
(4",cutting speed 0.9-1.0m/min)
3, XQA-04-003(XBS1)
(4",cutting speed:smooth cutting:1.0-1.1m/min)
Fast cutting:1.25-1.35m/min)

6.2 Diamond Cutting Blade for Glass Cutting (10"~14")


GLME	GLMA

Bond choice:
usually the glass cutting size is 12”(dia300) ,our bond may be used for cutting glass smoothly and it is not easy to achieve this result, cause normal bond may chipped the cutting edge.
Our bond is:
GLSA: XQA-04-003 (XBS1);
GLME: XTW-01-001B (XTH2).

* Cutting performance may be different against actual application, all information above only from the cutting in laboratory in RobtoL & RobLion.

7. Resin Bond Diamond Grinding Wheel


GWSA	GWSB	GWSC	GWSD	GWSE


GWSF	GWSG	GWSJ	GWSK	GWSL


GWSM	GWSN	GWSP

Technical specs(dia.125, for tungsten carbide, concentration:100%)
1, Bond A (KLRB, long life type)
grit size 200/230,
Grinding Speed: 0.41~0.50g/min
Grinding ratio: 1:125~1:130
2, Bond B (KFRB, normal type)
grit size 100/120,
Grinding Speed: 0.80~0.90g/min
Grinding ratio: 1:85~1:90

* Cutting performance may be different against actual application, all information above only from the cutting in laboratory in RobtoL & RobLion.

update: Sept. 15, 2011